Documents Dusinská, Maria 7 results

"NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions: 1. What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies? 2. What reference materials should be developed for use in environmental and ecotoxicological studies? 3. Is it possible to group different nanomaterials into categories for consideration in environmental studies? Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below. The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known. There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO(2) nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time. No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required to derive criteria that can be used to generate such categories, that would also include aspects of the material structure and physical behaviour."

"Whilst the global players in industry are rapidly moving forward to take advantage of the new opportunities and prospects offered by nanotechnologies, it is imperative that such developments take place in a safe and sustainable manner. The increasing use of engineered nanomaterials (ENMs) in consumer products has raised certain concerns over their safety to human health and the environment. There are currently a number of major uncertainties and knowledge gaps in regard to behavior, chemical and biological interactions and toxicological properties of ENMs. As dealing with these uncertainties will require the generation of new basic knowledge, it is unlikely that they will be resolved in the immediate future. One has to consider the whole life cycle of nanoproducts to ensure that possible impacts can be systematically discovered. For example, life cycle assessment (LCA) - a formalized life cycle concept - may be used to assess the relative environmental sustainability performance of nanoproducts in comparison with their conventional equivalents. Other less formalized life cycle concepts in the framework of prospective technology assessment may uncover further detailed and prospective knowledge for human and environmental exposure to ENMs during the life cycle of nanoproducts. They systematically reveal impacts such as cross product contamination or dissipation of scarce materials among others. The combination of different life cycle concepts with the evolving knowledge from toxicology and risk assessment can mitigate uncertainties and can provide an early basis for informed decision making by the industry and regulators."

"In the context of a large-scale molecular epidemiology study, the possible immunomodulatory effects of mineral fibres, in workers occupationally exposed to asbestos, rockwool and glass fibres, were examined. In each plant, 61, 98 and 80 exposed workers and 21, 43 or 36 control clerical subjects, respectively, were recruited. In the case of the asbestos-exposed subjects, an additional town-control group of 49 people was included. Evidence of pulmonary fibrosis was found in 42% of the asbestos-exposed workers, while evidence of pleural fibrosis was found in 24%. The asbestos-exposed cohort had significantly decreased forced vital capacity of lungs as well as forced expiratory volume per first second. Our findings indicate that exposure to all three types of fibres examined modulates to different degrees the immune response. Suppression of T-cell immunity and to a lesser extent, B-cell immunitywas found in the case ofworkers from a former asbestos cement plant, while stimulation of T-cell response was observed in rockwoolworkers, and stimulation of T- and B-cell response was seen in glass fibre workers. Depression of the percentage of lymphocyte subpopulation of CD 16+56 (natural killer cells) in peripheral bloodwas found in glass fibreworkers. Statistical analysis showed increased levels of proinflammatory cytokines (IL-6 asbestos; IL-8 all three fibres), expression of adhesion molecule L-selectin on granulocytes and monocytes (asbestos), levels of soluble adhesion molecules (SAMs) in sera (ICAM-1 all three fibres; E-selectin glass fibres), increased levels of immunoglobulin E (asbestos and rockwool) and elevated expression of activation markers on eosinophils (CD66b asbestos, glass fibres; CD69 asbestos). Significant correlations were observed between lymphocyte proliferation and markers of DNA."

"Occupational exposure to asbestos is strongly associated with pulmonary diseases, cancer and immunotoxic effects. Both systemic and local immunity may play an important role in the pathogenesis of these events. Immune cells appear to be influenced by asbestos exposure, either through direct effects or as a result of the host's protective response to exposure. In this study several immune system parameters were assessed in workers (n = 61) with at least 5 years' exposure to asbestos at an industrial plant. Workers exposed to asbestos fibres had significantly increased levels of immunoglobulin E and concentrations of interleukin-6 and -8 in comparison with two sets of controls (in-plant and town control groups). The levels of soluble adhesion molecule ICAM-1 were higher in the exposed group compared to the town control group. Significantly increased levels of IgA were found in asbestos-exposed group in comparison to the town control. Evaluation of the expression of adhesion molecules on lymphocytes, monocytes and granulocytes by flow cytometry showed significant increases in the class of selectins CD62L on monocytes and granulocytes. Moreover, significantly increased expression of markers CD69 and CD66b on eosinophils was found among workers exposed to asbestos. In conclusion, exposure to asbestos fibres was found to have several effects on immune system. Alterations of these immune parameters may indicate hypersensitivity (increased levels of IgE, increased expression of activation markers CD66b and CD69 on eosinophils) and an elevated inflammatory status (increased levels of interleukins—IL-6, IL-8) in exposed workers. "

"A comprehensive approach to evaluate genotoxic effects induced by styrene exposure was employed in 44 hand-lamination workers in comparison with 18 unexposed controls. The acquired data on single-strand breaks in DNA (SSBs), frequency of chromosomal aberrations and HPRT mutant frequency in peripheral blood lymphocytes were compared to the results on genotyping of some of the xenobiotic-metabolising enzymes (CYP1A1, CYP2E1, epoxide hydrolase and GSTM1, GSTP1 and GSTT1). Multifactorial regression analysis indicated that SSB in DNA were significantly associated with styrene exposure and with heterozygosity in CYP2E1 (5'-flanking region and intron 6; r(2)=0.614). The frequency of chromosomal aberrations (CA), as analysed by linear multiple regression analysis, significantly correlated with years of employment (P=0.004) and with combinations of epoxide hydrolase (EPHX) genotypes (exon 3, Tyr/His and exon 4, His/Arg), where individuals with low and medium activity EPHX genotypes exhibited higher frequencies of CA than those with high activity genotypes (P=0.044, r(2)=0.563). Moderately higher HPRT mutant frequencies were detected in styrene-exposed individuals (20.2 +/- 25.8 x 10(-6)) as compared to controls (13.3 +/- 6.3 x 10(-6)), but this difference was not significant. ANOVA (in the whole set of data) revealed that mutant frequencies at the HPRT gene were significantly associated with years of employment (F=6.9, P=0.0001), styrene in blood (F=10.1, P=0.0001), and heterozygosity in CYP2E1 (intron 6; F=13.5, P=0.0008) and GSTP1 (exon 5; F=3.6, P=0.038).In conclusion, our present data suggest that analysed biomarkers of DNA damage may be modulated by polymorphic CYP2E1, EPHX and GSTP1. In our study, styrene-specific DNA and haemoglobin adducts are under investigation. Completing these data with the results of genotyping of metabolising enzymes may provide a useful tool for individual genotoxic risk assessment."

"Styrene is a widely used industrial chemical. Immune and hematological parameters were examined in 29 hand laminators and sprayers exposed to styrene for an average of 14 years and in 19 in-factory unexposed controls. The workers performed hand lamination procedures in a production area with an average area airborne styrene level of 139.5 mg/m3. Mean concentration of styrene in the blood of exposed workers was 945.7 g/L and the mean styrene in exhaled air was 38.8 g/L. ...These results suggest immune alterations of cell-mediated immune response of T-lymphocytes and imbalance in leucocyte subsets in peripheral blood of workers exposed to styrene. ..."

"Background: Many epidemiological studies and reviews have been performed to identify the causes of bladder cancer. The aim of this review is to investigate the links between various environmental risk factors and cancer of the bladder.
Methods: A systematic literature search was performed using PubMed, Science Direct, Scopus, Scholar Google and Russian Google databases to identify reviews and epidemiological studies on bladder cancer risk factors associated with the environment published between 1998 and 2010. Only literature discussing human studies was considered.
Results: Smoking, mainly cigarette smoking, is a well known risk factor for various diseases, including bladder cancer. Another factor strongly associated with bladder cancer is exposure to arsenic in drinking water at concentrations higher than 300 µg/l. The most notable risk factor for development of bladder cancer is occupational exposure to aromatic amines (2-naphthylamine, 4-aminobiphenyl and benzidine) and 4,4'-methylenebis(2-chloroaniline), which can be found in the products of the chemical, dye and rubber industries as well as in hair dyes, paints, fungicides, cigarette smoke, plastics, metals and motor vehicle exhaust. There are also data suggesting an effect from of other types of smoking besides cigarettes (cigar, pipe, Egyptian waterpipe, smokeless tobacco and environmental tobacco smoking), and other sources of arsenic exposure such as air, food, occupational hazards, and tobacco. Other studies show that hairdressers and barbers with occupational exposure to hair dyes experience enhanced risk of bladder cancer. For example, a study related to personal use of hair dyes demonstrates an elevated bladder cancer risk for people who used permanent hair dyes at least once a month, for one year or longer.
Conclusion: Smoking, in particular from cigarettes, exposure to arsenic in drinking water, and occupational exposure to aromatic amines and 4,4'-methylenebis(2-chloroaniline) are well known risk factors for various diseases including bladder cancer. Although the number of chemicals related to occupational exposure is still growing, it is worth noting that it may take several years or decades between exposure and the subsequent cancer."